MRO Products
1. AMBERCLENS
Anti-Static Foaming Cleaner

Use to remove general grime and soiling on all surfaces. Particularly effective as a post-maintenance cleaner for removing finger marks and oil residues. Anti-Static formulation inhibits dust attraction.

  • Remove light oils, finger marks, and general grime.
  • Safe for use on plastics, metals, painted and glazed surfaces
  • Multiple industrial approvals: Rail, NATO, Ford, British Coal, Rolls Royce Aerospace.
  • psum is simply dummy text of the
  • Available as a non-flammable propellant version “Amberclens NB”.

2. AMBERSOLV AB1
Water-Based Citrus Cleaner

Water-based cleaner with added citrus power. Use to clean around gearboxes, pumps and for removing hydraulic oil leak residue.

  • Removes difficult soiling such as: oil, grease residue, grime, silicone, water-based paints and inks/dyes
  • Ideal as a post-maintenance cleaner or as a general cleaner for removing more stubborn soiling
  • Biodegradable

3. STAINLESS STEEL CLEANER FG
Dual Action Cleaner And Polish

For use on all types of stainless steel and other ‘shiny’ surfaces to remove light oils, fingerprints, and water marks.

  • NSF A7 and C1 registered (N0 138212)
  • Dual action: cleans and polishes in one application.
  • Dense foam allows use on vertical surfaces without dripping.
  • Leaves an invisible, non-greasy film for lasting shine.
  • Ideal post-maintenance cleaner.

4. TOUGH WIPES
High Absorbency Hand Cleaning Wipe

High absorbency hand wipes over-layered with a polymer web for all the deep cleaning power of pumice in a handy wipe.

  • Highly effective on a range of soiling types: adhesives, grease, oil, tar, silicone, resins, paints and more.
  • Contains anti-pathogen agents highly effective against common bacteria and viruses such as Weils Disease, MRSA, Salmonella, Listeria and E.Coli. Passes BS 12054(hand sanitising) and BS 1276 (surface sanitising).
  • No contamination or lasting fragrance from heavy perfumes.

5. AMBERKLENE FE10
Fast Drying Solvent Degreaser

Use for the general degreasing of machinery including chains, gears, bearings, drives, motors and more.

  • Powerful flushing action rapidly dissolves and removes contaminants.
  • Safe for use on all metals and most plastics.
  • Zero residue – perfect for surface preparation prior to bonding, painting, coating or relubrication.
  • Fitted with the Ambersil 360 degree spray system for all angle use.

6. AMBERKLENE ME20
Heavy Duty Solvent

Formulated with a slower evaporation rate for longer contact time on heavy grease and old lubricant deposits.

  • Removes heavy, old and significant deposits of oil, grease, waxes and silicone.
  • Superior wetting properties ensures extended contact time and solvency performance.
  • Higher flash point of 410C for application safety.
  • Leaves a clean, dry, residue free surface.

7. LEC-KLENE
High Flash Point Solvent Degreaser

An advanced high flash point solvent degreaser for electronic and aviation components. The ultra-pure formulation delivers a good level of solvency power with excellent materials compatibility.

  • A fast and effective general purpose degreaser.
  • printing and typesetting indu
  • Higher flash point (>62 0C) for application safety.
  • Use where DEF STAN 68-148 is specified.
  • No detrimental effect on painted surfaces, ferrous or non-ferrous metal, epoxy based composites, acrylic sheet, plastics and rubber.

8. FASTCLEAN 200
Extra Fast & Powerful Solvent

An advanced degreasing solvent that has both exceptionally fast drying speed and very high solvency power.

  • Removes heavy, old and dried-on deposits of oil, grease, waxes and silicone.
  • Powerful flushing action rapidly dissolves and removes contaminants.
  • Non-chlorinated.
  • Zero residue.

9. AIR DUSTER
Non-Flammable Duster For Electronics

A high pressure, inert, liquefied gas that safely removes dust and loose debris with a powerful ‘air’ jet. Helps prevent electronic component errors or downtime.

  • Safe for use on all surfaces, electronic components and sensors.
  • Does not contain CFC’s, HCFC’s and is non-ozone depleting.
  • Powerful blast easily displaces loose contamination.
  • Non-flammable & zero odour in use.

10. 40+
Non-Flammable Duster For Electronics

A true multi-purpose ‘cure-all’ for engineers: use as a dewatering fluid, a penetrant on seized fasteners, a general lubricant and as a corrosion inhibitor.

  • Excellent water displacement performance.
  • High di-electric strength, non-conductive film.
  • Safe on most paints, plastics, rubbers and all metals
  • Operational temperature range: -200C to +1150C

11. PX 24
Military Grade Protective Lubricant

Exceptional multi-purpose lubricant formulated to military specifications. It offers excellent materials compatibility, good lubrications as a machine oil, total moisture displacement and medium-term corrosion protection.

  • Meets military specification Def. Stan 68 -10 Issue 5 PX24.
  • Operational temperature range: -200C to +1150C
  • Rolls Royce Aerospace Approved: 1042 E
  • AgustaWestland approved: WHPS: 158
  • Fitted with a 3600 Spray System for all angle use.

12. AGL 1
Lubricant for Electrical Equipment

Use to displace moisture and protect electrical contacts from corrosion.

  • Ideal for renovating water-damaged equipment and motors.
  • Provides precision lubrication with its thin, high dielectric strength lubricating film.
  • Cleans, lubricates and protects all in one application.

13. PENETRATING OIL
Penetrant for Seized Parts

Use as a highly effective release agent for all types of seized fasteners.

  • Quickly frees fasteners seized by corrosion, heat and over tightening.
  • Lubricates fine and close tolerance threads.
  • Contains MoS2.
  • Facilitates easier disassembly & reassembly.
  • Softens rust and carbon deposits.

14. RUST FLASH
Penetrant with Freeze Shock Action

For use on all seized and corroded fasteners. Ideal for bolts on equipment located outside and subjected to adverse conditions.

  • Utilises the laws of thermo-dynamics: shock rust down to -400C.
  • The rapid temperature drop causes the rust to fracture, allowing the lubricating oils to penetrate faster.

15. SILICONE LUBRICANT
General Purpose Silicone Lubricant

Use for plastic-to-plastic lubrication and as a highly effective friction inhibitor on chutes and slides. Ideal for use on tight plastic pipe fittings, or as a cutting aid on paper/textile blades.

  • Odourless, colourless and non-staining.
  • Non-toxic and safe for use with potable water systems.
  • Exhibits excellent slip properties on blades, tables, chutes and conveyor guides.
  • Operational temperature range: -500C to +2000C.
  • WRAS approved product: 0311521.

16. AMBERGLIDE
Concentrated PTFE Lubricant

A general purpose lubricating oil fortified with high levels of PTFE for exceptional lubrication and anti-friction properties.

  • Provides a long-lasting and durable film.
  • Significantly increases re-lubrication intervals.
  • Operational Temperature range: -100C to +1800C.
  • Highly water resistant and repels water from treated areas.

17. DRY FILM ANTI-STICK
Concentrated Dry PTFE Lubricant

A concentrated, high PTFE content dry film lubricant for the lubrication of moving parts where an oily/wet or silicone lubricant cannot be used.

  • The high level of PTFE in the dry film provides excellent anti-friction and slip performance to all sliding surfaces.
  • Excellent materials compatibility.
  • Suitable for use as an anti-tracking agent.
  • The dry film is unaffected by oil or solvents.
  • Operational Temperature range: -1000C to +2000C.

18. DRY MOLY
Dry Molybdenum Disulphide Lubricant

For use in high load applications where other lubricants would fail, but a dry film is still required. Use as a running in treatment on rolling and sliding bearings.

  • Tough and long lasting resin bonded lubricant.
  • Multiple applications (recoating) provide enhanced performance, with the final coat benefitting from light polishing to further improve slip.
  • Operational Temperature range: -1500C to +4000C.

19. COPPER ANTI-SEIZE PASTE
High Temperature Anti-Seize

Use on threaded fasteners to prevent seizing during prolonged maintenance intervals, in hostile/high humidity environments and areas subjected to high temperatures.

  • Formulated with micronized copper and anti-oxidant additives to reduce friction and wear. Lead & Nickel free.
  • Good corrosion protection even in highly corrosive environments.
  • Operational Temperature range: -300C to +11000C.

20. GEAR & WIRE ROPE LUBRICANT
Heavy Duty Lubricant

Specially formulated for open gears in dusty environments (e.g. quarries) where the semi-dry film does not attract or hold dust. Use on all wire ropes subjected to tension and/or movement.

  • Forms a semi-dry, non-peeling film that overcomes the limitations of grease and pressure cushions.
  • Can be applied to gears in motion.
  • Deep penetration of wire ropes for internal lubrication and corrosion protection.
  • Operational Temperature range: -250C to +1100C.

21. CHAINSPRAY
Chain and Drive Lubricant

Use on all types of drive chains, including production line, door mechanisms, quarry plant and drying oven doors.

  • Offers maximum adhesion to chain link with excellent penetration, lubrication and corrosion protection of the pins.
  • High temperature resistant: up to 2000C continuous (3000C intermittent).
  • Also available as an alternative product specifically for use on fork lift trucks: “FLT Chain Spray”.

22. BELT DRESSING FG
Adhesive Belt Lubricant

Improves grip on all types of belts whilst reducing squeak and prolongs belt service life.

  • NSF H1 registered (N0 140257)
  • Works on all types of belts: vee, flat, toothed, rubber, leather and fabric.
  • Protects belt from deterioration through oxidation and heat.
  • Tacky lubricating film increases belt pulling power and does not fling off.

23. WHITE SPRAY GREASE
Multi-Purpose Spray Grease

Ideal for use on vehicle door hinges, on runners, guides and for assembly of close tolerance parts.

  • Multi-purpose white grease in an aerosol.
  • Good penetration for even coverage and protection.
  • Operational Temperature range: -100C to +1200C.

24. AMS4 SILICONE GREASE
Military Grade Silicone Grease

Military & aviation grade XG250 silicone grease for use on rubber seals to prevent cracking, on 3-phase connectors to prevent moisture ingress and for general lubrication.

  • Insulates high voltage parts against leaking and arcing.
  • Waterproofs electronics in damp or humid conditions.
  • Meets military and aviation specifications: Def. Stan 68-91/1.

25. TUFCUT SPRAY
Metal Cutting Lubricant

Tufcut is a range of specialist metal cutting lubricants based on a mixture of lubricants, extreme pressure additives and anti-oxidants. The range has been formulated to offer instant, ready to use metal machining products that demonstrate exceptional performance in demanding applications. All products are suitable for use on a wide range of metal types, including stainless steel and high carbon steel, where “right first time” results are required.

  • The original Tufcut liquid, in an aerosol.
  • Allows heavier close tolerance cuts.
  • Apply directly to drill bits or work pieces.
  • Improves heat dissipation and prevents chip welding.
  • NSF H2 Registered.

26. SPATTER RELEASE
Non-Flammable Weld Anti-Spatter

Traditional solvent based spatter release for all welding applications.

  • Prevents spatter adhesion to welding equipment, work pieces, surfaces, jigs and surrounding areas.
  • Non-Flammable.
  • Does not affect post-welding operations.
  • No silicone.
  • Anti-spatter film is easily wiped away.

27. BIOWELD
Water Based Weld Spatter Release Agent

A water based spatter release agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils.

  • Odourless, non-flammable and safe in use.
  • Fine spray pattern for excellent coverage.
  • Does not contain silicone or solvents.
  • Contains a highly effective flash-rust inhibitor.
  • Automotive approval: Ford Tox No.: 163241

28. FREEZER
Fault Detection For Electronics

Use on electronic circuits to identify thermally intermittent faulty components.

  • Rapidly reduces component temperature by up to -500C
  • Non-flammable, non-toxic and completely odourless.
  • Can be used to cool thermally sensitive parts during soldering or calibration.
  • Rail Approved product (007/020505).

29. LEAK DETECTOR
Water Based Gas Leak Detector

Highly visible and easy to use gas leak detector for pipe and joints. Ideal for HVAC installations.

  • Water-based formulation with no oils, silicone, solvents and no ‘run-off’ hazards.
  • Non-flammable and odourless.
  • Oxygen system safe.
  • Meets BS EN 14291:2004 and can be used for VOSA MOT testing.

30. FLAW DETECTORS: Cleaner/Penetrant/Developer
Dye Penetrant System For Non-Destructive Testing

Use as a highly accurate check for weld quality. Ideal for use on military vehicle repair, maintenance and storage tank fabrication.

  • Fast acting visual results from NDT red dye system.
  • Can be applied directly to the component being tested without the need for dismantling.
  • Meets ASME Sec. V, RCC-M Tome 111 Chap, MoD.

31. BRIGHT, COLD GALVANISE
Repair For Hot-Dip Galvanised Steel

Bright, Cold Galvanise goes on bright then weathers naturally for ‘invisible’ repairs.

  • A barrier coating that protects ferrous metals from corrosion.
  • For use on bare, clean, non-rusted steel and seams.
  • Long-lasting corrosion protection.
  • Suitable as a top-coat for Cold Galvanise.

32. BATTERY TERMINAL PROTECTOR
Anti-Corrosion Terminal Treatment

Protects battery terminals on fork lift trucks and generators from wear and corrosion and seals out moisture.

  • Protective grease prevents wear to terminals through clip movement.
  • Highly visible dye gives an early indication of acid leakage by changing from pale yellow to red.
  • Viscous consistency prevents over application.
  • Excellent materials compatibility.
  • Operational Temperature range: -100C to +5000C.

33. ADHESIVE MP 100
Multi-Purpose Adhesive

Ideal for bonding almost anything to most hard surfaces including wood and metal.

  • Tack time approximately 30 seconds.
  • Permanent bonds.
  • Our best selling adhesive.
  • Big value 500ml fill size.

34. ADHESIVE HS 300
High Strength Adhesive

Use where a high strength adhesive is required e.g. warning and information signs.

  • Tack time less than 10 minutes.
  • Free from chlorinated solvents for improved user safety.
  • Sheer strength: >375 N per inch (25 mm2).
  • Big value 500ml fill size.

35. FORMULA 6
Medium Duty Silicone Release Agent

A general purpose release agent for all thermoplastics and many types of rubber. It is highly versatile as a release agent, ensuring accurate mould detail and improving surface finish without building up in the mould.

  • Improves surface finish, minimizes imperfections and enhances even well polished tool release properties.
  • Operational to +2000C.
  • Can also be used as an anti-stick agent in the textile, foam converting, printing and shoe industries.

36. FORMULA 1 & FORMULA 1 HT
Heavy Duty Silicone Release Agents

Heavy duty, high silicone concentration, mould release agent available as either a ‘regular’ or ‘high temperature’ version.

  • Operation temperature up to +2000C for regular version.
  • Automotive approved: Ford Tox No.: 168735.
  • Formula 1 HT is a highly effective spinneret lubricant for use in the manufacture of synthetic fibres.
  • “HT” Version: +2000C continuous, +3000C intermittent.

37. FORMULA 20
Paintable Silicone Release Agent

Specialist mould release agent based on a unique active material that allows post-moulding operations e.g. coating, painting, plating and adhesion.

  • No oily film – reduces the requirement to clean.
  • Effective on a wide variety of materials including: ABS, Polyethylene, Polypropylene, PVC, Polyamides and Polyurethanes.
  • Removes the need to wax wash in investment casting.

38. PUR 400
Silicone Release Agent For PU

A silicone release agent that has been specifically formulated to provide a fine release film for use with integral skin and elastomeric polyurethanes.

  • High quality, high gloss, even finish.
  • Fine spray pattern for excellent coverage.
  • Low odour.
  • No build up on mould surface – suitable for use on low temperature mouldings.
  • Operational to +2000C.

39. FORMULA 4
Non-Silicone Release Agent for PVC

Excellent release for PVC, Polyurethane elastomers and other flexible polymers. Ideal for the release of moulded shoe soles.

  • A wet film mould release that imparts a gloss finish to moulded parts.
  • Will not interfere with post moulding operations.
  • Does not build up in the mould.
  • Operational temperature to +2000C.
  • Passes crib source 5, Furniture & Furnishings (Fire Safety) Regulations 1988.

40. FORMULA 14
Non-Silicone Release Agent

Non-silicone release agent specifically developed for the release of thermoplastics: LDPE, HDPE, PP, PVC, PS, POM, PA.

  • Excellent release properties in a durable film.
  • Operational temperature up to +2000C.
  • Multiple releases per application can be achieved giving improved economy in use.

41. MOULD PROTECTIVE
Corrosion Inhibitor For Mould Tools

Non-silicone corrosion inhibitor for injection moulding tools and dies.

  • Repels and displaces moisture leaving a durable, non-greasy protective film.
  • Applied film will not harden or crack.
  • Allows handling and resists acid finger marks.
  • Light yellow film ensures total coverage can be seen.
  • Cured film will not stain moulds.

42. GREEN MOULD PROTECTIVE
Highly Visible Corrosion Inhibitor

Tenacious and long-lasting anti-corrosion treatment for mould tools. The highly visible green spray provides easy visual inspection to ensure complete coverage.

  • Non-silicone corrosion inhibitor for injection moulding tools.
  • Repels and displaces moisture leaving behind a durable protective film for excellent long-term tool storage.
  • Waxy film allows handling & will resist acid finger marks.
  • Easily moulded off once production recommences.
  • Ideal for the long-term storage of mould tools.

43. POLYMER REMOVER
Heavy Duty Mould Cleaner

Highly effective and powerful solvent blend developed for use on polymer residues and soiled tooling/equipment.

  • Controlled rate of evaporation for maximum efficiency.
  • Removes: plastics, rubbers and resin deposits including: ABS, Acetyls, PVC, Epoxy Resins ( uncured), Polyamides, Polystyrenes, Silicone Resins and Rubbers.
  • It will also remove other materials such as cellulose resins and alkyd resins.

44. MOULD CLEANER
General Cleaner for Mould Tools

A powerful solvent blend formulated to remove a wide range of common soiling from moulds, tools & dies.

  • Quickly and easily removes oils, grease, old protective films & release agents.
  • Ideal for removing old release agents.
  • Evaporates to leave a clean, dry, residue free surface.
  • Special formulation allows use on hot production tooling without excessive solvent loss.

45. AMBERCLENS WIPES
Multi-Purpose Cleaning Wipes

A multi-purpose, cleaning wipe offering all the advantages of the original Amberclens cleaner. Ideal for use on business machines, office equipment, machinery, plant, equipment, cabinets and casings.

  • Quickly and easily removes dirt, grease and grime.
  • Safe for use on plastics, metals and painted surfaces.
  • Anti-static formulation, reduces the attraction of airborne dust.
  • Big value 100 wipe pack.
  • Ideal for use where water and cleaning materials are not freely available.

46. AQUASAFE
Biodegradable Cleaner Degreaser

Water based detergent cleaner that exhibits high solvency power. An ideal alternative to traditional solvents, suitable for use in industrial, automotive, engineering, transport, aviation, marine and electronics applications.

  • Non-flammable water based cleaner/degreaser.
  • Removes tough and stubborn soiling such as oil, grease, grime, silicone, wax, nicotine, soot, ink and coffee.
  • Super industrial strength, can be diluted 1:40 with water.
  • Safe on most plastics, rubber and painted surfaces.
  • Contains a highly effective corrosion inhibitor to help prevent flash rusting.
  • Multi use by spraying, soaking, brushing, immersion, wiping or ultrasonic.
  • Available as Ready-to-Use 750ml trigger spray or concentrated bulk packs.